Post by MyLittlePony on Aug 22nd, 2008 at 10:33pm
The leather matches my factory red interior perfectly. The 05 switches work ...and now I have lumbar support (switch works as well). Oh if only they came with a heated option.
I would hafta say the upgrade went pretty well, and are easier to install than the "universal" summit seats. Not to mention that they sit much lower than before too. Not like that was a problem for me (5'4") but I felt that its worth mentioning. Due to the way the SN-95 floor is, when lowered completely you cannot move the seat forward due to clearance issues, but when raised a little there is no problem... ...and again, with my height, should never be an issue.
What we did was we completely took off the seat rails off both seats (94 and 05) and swapped them. No addition brackets needed to be made... ...pretty much the only thing difficult was drilling holes for the 94 brackets to screw in, and soldering the 05 wiring to work with the 94 power seat mechanism.
interior2.jpg (53 KB | )
I would hafta say the upgrade went pretty well, and are easier to install than the "universal" summit seats. Not to mention that they sit much lower than before too. Not like that was a problem for me (5'4") but I felt that its worth mentioning. Due to the way the SN-95 floor is, when lowered completely you cannot move the seat forward due to clearance issues, but when raised a little there is no problem... ...and again, with my height, should never be an issue.
What we did was we completely took off the seat rails off both seats (94 and 05) and swapped them. No addition brackets needed to be made... ...pretty much the only thing difficult was drilling holes for the 94 brackets to screw in, and soldering the 05 wiring to work with the 94 power seat mechanism.
interior2.jpg (53 KB | )
